The turbo nozzle was especially effective in restoring deeply stained concrete to a blazing white. Accessories – You can effectively use a washer that comes with multiple accessories like extension wands, brushes, patio broom or washers. With these multiple accessories, you can easily clean several surfaces.
It’s priced just below the overall average price of all units I tested, and that says something since its water pressure output and engine size are among the top specs overall. The spray wand is nothing special, but tool storage is fine, and it ships Champion Power Equipment with all five standard spray gun tips . There is also an attached detergent tank, which I think is great, even though I personally don’t often use detergent with my own gas washer. High-quality pressure washers are traditionally not very cheap.
Both of these PSI and GPM have to be taken into consideration when you buy a gas pressure washer. Glancing at its key specification, the pressure output is 2900 PSI and GPM is around 2.5. This engine and pump are seamlessly balanced over the axle for superb maneuverability. With the Champion Power Equipment help of quick-change connectivity, it is easy to switch from one nozzle to another. You can pop on the soap nozzle for efficient cleaning of boats, cars, and RVs. The different nozzles aptly meet the need for a wide range of projects with different sizes of surface sensitivities.
The water supply connection can seem like a small detail, but interacting with these things add to the overall experience of using each machine. The Briggs & Stratton has a 35-foot power cord, which, actually, is one of our few complaints. With the 25-foot inlet hose in tandem, we found it to be cumbersome to keep them from tangling every time we wheeled the pressure washer to a different spot. The pistol has an easily accessible lock and trigger release, but the connector for the inlet hose is too close to the trigger and was tricky to secure.
A dirty air filter reduces the amount of air that reaches the engine, which can cause the pressure washer to run poorly and could eventually damage the unit. When you are finished using your Westinghouse pressure washer, you should always check the oil level before you start it up again. This is to ensure that the pressure washer will run smoothly and that you won’t damage the engine. In order to check the fuel level, locate the fuel cap on the pressure washer. There will be a fuel gauge or indicator on the pressure washer that will tell you how much fuel is left in the tank. The next step is to check the hose and nozzle for any damage.
Leaving any water inside the wand will cause rust and can damage the unit. Squeeze the trigger on the spray wand for about seconds until all blips from air pockets have stopped, and you have a constant flow of water. The order in which you set up the pressure washer is important to prevent damage to the machine. Noise level is not directly related to effectiveness or cleaning power, but some folks are more sensitive to noise and may have neighbors who could be as well. The AR Blue – AR383 was the first machine we tested, and it was an interesting way to start. It’s the lowest-priced machine we tested, and it gets the job done, but its shortcomings became very obvious once we saw what the other machines had to offer.